Ozone Units and Parts

Ozone Non-Return check valve 1/4" Barb. Takes 5mm(internal diameter) ozone hose.

DEL OZONE SPA Corona Discharge Ozonator unit – This unit was formally the Aqua Sun XL-30. Unit is supplied with check vale and comes with a bare AMP lead. Ozone output is variable from 50-100mg/hr. Unit SpecificationsLead Length: 1.2mPlug Type:Bare AMP Unit DimensionsLength: 67mmWidth:...

Universal Spa Pool Ozone Generator Kit – 50mg/h – 240V | Balboa, Joyonway & More Keep your spa water cleaner, clearer, and fresher with this Universal 50mg/h Spa Pool Ozone Generator. Designed to work with most spa pool brands, this ozone generator helps destroy...

ool Ozone System NZ – B-Natural Ozone Generator | The Spa Shop Upgrade your pool water treatment with the B-Natural Pool Ozone System, available at The Spa Shop NZ. This advanced ozone generator for swimming pools is designed to integrate seamlessly with your existing...

Aqua Sun Ozone XL-80. Made by Pacifica Pool And Spa USA Corona Discharge Ozone with build in injector, Variable output from 50 to100mg Used on Sapphire Spas

UltraZone UV-C and Bo3 Corona Discharge ozone Spa Sanitiser unit. UltraZone combines ozone and UV-C sterilisation technology. This unit works by the ozone gas being generated then injected and mixed into the UV chamber. The UV then reacts with the ozone to create a...

Davey Del Corona discharge ozone unit. Produces high ozone concentration levels via coroma discharge electrode technology, which increases water quality. Unit produces 50mg/hour. Comes complete with tubing and non-return check valve. Available in either AMP or standard 3 pin plug.

Hotspring Spas Injector Ozone Kit (Black) Highlife and Limelight

CMP ozone mazzei injector

Ultrazone, Clearzone, Bo3 and XL-80 Check Valve Replacement Kit Check Valve Replacement Kit Instructions are included in the kit.

19mm UV Sanitiser Hose Connection.

Black Ozone Tube, Industrial Grade Tube. ID 5mm,   OD 8mm, 5meter roll Made In Australia

Black Ozone Tube, Industrial Grade Tube. ID 5mm, OD 8mm,

Del Ozone Check valve with 80cm of tube Please Note: Tube may not get supplied in green colour.

Blower, Ozone and Circulation pump 1.0mm x 3.0m AMP overmoulded cordset. This cordset is used on Davey/Spa-Quip and SpaNET controllers. Due to overmoulded plug it is unable to be used on Balboa, Gecko and Aeware units

Oznone 1.0m JJ cordset. Commonly used on pumps that plug into older style Spa-Quip, Balboa and Gecko Controllers.

Suits Watkins, Endless Swim Spas

Mini-Ozone Jets are non-adjustable. Mini-Ozone Jet bodies are available in 25mm (hard plumb) or 19mm barbed (soft plumb) and are manufactured in PVC. Mini-Ozone jet face diameter is 41mm and the hole size required is 25mm.

Mini-Ozone Jets are non-adjustable. Mini-Ozone Jet bodies are available in 25mm (hard plumb) or 19mm barbed (soft plumb) and are manufactured in PVC. Dimensions:Face Diameter: 41mmHeight: 24mmDiffuser Diameter: 23mm Suits Jet Body:E-4209 and requires barb E-4834

CMP ozone return jet in graphite grey. Has a 42mm face with a 23mm orifice. Requires a 32mm hole. Commonly used on Sapphire Spas.

Ozone Wall Fitting – Graphite Gray Has a 42mm face with a 23mm orifice. Requires a 32mm hole. Commonly used on Sapphire Spas. DimensionsFace Diameter: 42mmDepth: 53mmHole Size: 32mm

Gecko Waterlab Kit Sanitation made simple Waterlab Chamber, easily plumbed inline to existing or new return lines. Install before any ozone, uv, etc in the plumbing. Minimum flow rate required is very low - 2.0 litres per min.Waterlab Probe - single calibration, 4 year...

Reducer barb 3/8'' - 1/4'' (9mm air line to 5mm ozone tube)

Ultrazone/S100 UV Replacement Lamp.Lamp is 280mm long(Not including connector pins).Suits the following models Ultrazone, Clearzone, Spa Guardian, S100 and Trident.

Replacement UV Lamp, suits the following brands of spas Arcadia, Monarch, O2 Spas, Vortex Spas and others. Details: 305mm (1 Foot) Long (not including connection pins)